Arduino LCD Display Module 2.2 Inch SPI Serial Port 176X220 LI9225 TFT Display LCD Module For Arduino
2.2 Inch Arduino LCD Display module Product Features:
- 2.2-inch color screen,support 16BIT RGB 65K color display,display rich colors
- 176x220 resolution, clear display
- Using the SPl serial bus, it only takes a few lOs to illuminate the display
- With SD card slot for convenient function expansion
- Provide underlying libraries and rich sample programs for Arduino, C51, and STM32 platforms
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
2.2 Inch Arduino LCD Display module Product Parameters
Display Color:16BIT RGB 65K color
Screen Size:2.2(inch)
Type:TFT
Driver IC:ILI9225
Resolution:176*220 (Pixel)
Module Interface:4-wire SPl interface
Backlight:3 White Led
Active Area:34.85×43.56(mm)
Module PCB Size:42.46×67.20 (mm)
Operating Temperature:-20℃~60℃
Storage Temperature:-30℃~70℃
Operating Voltage:5V/3.3V
Power Consumption:TBD
Pin Definition
1 VCC:LCD Power positive (3.3V~5V)
2 GND:LCD Power ground
3 GND:LCD Power ground
4 NC:Not defined, reserved
5 NC:Not defined, reserved
6 NC:Not defined, reserved
7 LED:Backlight control, high level lighting,if not controlled, connect 3.3V always brigh
8 CLK:LCD SPI bus clock signal
9 SDI:LCD SPI bus write data signal
10 RS:LCD register / data selection signal,high level: register, low level: data
11 RST:LCD reset signal, low level reset
12 CS:LCD chip select signal, low level enable
Applications:
Digital photo frame, touch handwriting board, e-book, MP3 player, handheld instrument, etc.
Packing term
Protect product with polyfoam and multi layer paper board.
Special protect carton for exporting product,
Per customer requirement.
Delivery term
For samples, we will finish production and ship within 7~15 working days. We usually arrange DHL, UPS, FedEx express to ship samples.
For bulk orders, usually 25~35 working days and depends on your design. For bulk orders, we support shipping by air or by sea as per customers' requirements.
Custom design OEM/ODM solutions
We support both standard and customized products and can put your logo on the products. Our experienced R&D team will support technical questions. ODM/OEM products are warmly welcome.
Our Advantages
Prompt reply within 12 hours.
Products with top quality.
Very competitive prices.
Small MOQ accepted.
More than 10 years’ experience in LCD R&D and manufacturing.
Strong R&D term supports perfect customized projects.
Fabulous after-sale service.
